Best microphones for recording 2024: Top studio mics for instruments, vocals and more (2024)

Sorting out the best microphones for recording is no simple task. With so many mics to choose from, we honestly struggled to single out a reasonable amount of what we think are the best recording tools to arm yourself with. From cheap dynamic mics to expensive condensers, there's a huge amount of choice in this guide, but taking the time to scroll through should cover all your recording needs.

We managed to get it down to 22 mics which is still a hefty chunk, but it's certainly a lot less than the amount of microphones we've tested over the years. Nearly every single entry here has a full review by one of our team, and where it doesn't, we will have been recommended a mic by colleagues or those who are working professionally in the industry. This means you can rely on any of our picks to help up your recording game. We've sorted them by price to make it easier to choose, so you can select the price range for your budget and get onto the fun stuff of actually making music.

At the very bottom of this rather long article you'll find some FAQs, which feature loads of useful advice from the MusicRadar team on which mic to choose, what the differences are between mics, and the use cases for each type. We've also got some top picks for you just below if you just want to get something quickly that will do the job. Let's get to it...

Our top picks

If you're after a cheap mic that'll go the distance, we'd go for the SM57 or the Audio-Technica AT2020. Both mics can cover a lot of ground with the SM57 being perfect for instruments, while the AT2020 is a great mic for recording vocals. With both being around the $/£99 mark, they're excellent value for money too.

If you've got a bit more money to spend, the Aston Microphones Origin continues to make a lasting impression. Its sound depth and construction quality far exceed its price point, making it a standout choice. We’re also quite enamoured with the Lewitt Pure Tube, on account of its superior low-noise floor, which means we can layer and stack vocal takes without fear of adding a bunch of hiss to our finished recordings.

Finally, if you've got a larger budget and need a truly versatile recording solution, the Slate VMS Modeling microphone can help you cover a lot of ground. It's not cheap, but for vocals we absolutely love the JZ Microphones Vintage V12, which is based on the classic AKG C12 tube mic but at a considerably lower price point.

Best microphones for recording under $/£200

While there are some truly superlative mics on this list, not all of them would be the ideal choice for close-mic’ing a raging 4x12 guitar amp cabinet. This ability to withstand huge volumes, without breaking a sweat, earns the Shure SM57 a place on this list.

Pair it with a decent condenser mic, and play around with different placement options for a time-honoured solution that captures both the quiet>loud dynamics and the unique harmonic make-up of a valve amp’s tone. It’s not subtle, but it is certainly effective.

Read the full Shure SM57 review

The Audio Technica AT2020 regularly tops best-seller lists thanks to its combination of great sound and reasonable price point. Condenser mics are extremely versatile, so if you need a budget mic for multiple applications, it’s a great choice.

The AT2020 flatters vocalists with its warm lower mid-range, and we found it sounded great on pianos and for capturing room ambience. The subtle high-end lift adds some air but it never got harsh when we were testing it, with no hint of an overly sibilant sound.

It rejects off-axis noise really well, but it isn’t the quietest mic we’ve ever tested. The lack of a shock mount helps keep the cost down, but condenser mics perform much better with one so that will add to your spend a little. For the money you do get a mic that feels just as well built as AT’s pricier microphones, making it perfect for budding engineers on a budget.

Read our full Audio Technica AT2020 review

The Solo is a well-weighted, solid microphone; light hand-held mics suck. The grille has a flat front which we much preferred to the usual bulbous type: it not only gives a more consistent distance guide when up close, it is also less likely to knock your front teeth out in a rowdy club gig.

The output impedance is higher than the average dynamic microphone, and this is reflected in the healthy level at the preamp. This bodes well for controlling noise and feedback in live event gain staging, as well as studio usage. A beefy output is useless if the sound doesn’t pull its weight, which in this case it does.

Read our full Sontronics Solo review

We’re big fans of equipment that can carry out more than one function. IK Multimedia are the masters of finding new and innovative ways of increasing the capabilities and tricks their products offer, and the iRig Stream Mic Pro is a great example. Combining a dual-capsule condenser mic - with four different pickup patterns - with a 2 in/4 out audio interface for connecting different sound sources and outputs, means you really only need this device and you’re up and running.

The audio interface, in particular, is nicely thought out, with loopback functionality meaning you can route audio from different applications internally. You might, for example, want to stream an Ableton Live session but find Windows doesn’t play nicely with multiple sound sources. Loopback is your friend here.

As with IK’s other gear, the iRig Stream Mic Pro is designed with portability in mind and full cooperation with the smartphones and tablets in your lives, making for a superb value, highly versatile mic which will suit a variety of different use cases.

Read the full IK Multimedia iRig Stream Mic Pro review

Kudos to Sennheiser for such a simple ‘why didn’t I think of that’ idea. Miking up a guitar cab is rarely that difficult but positioning a mic on a little stand or badly behaved boom arm is always a bit more work than it should be. A nudge of an elbow here, or a gentle stub of a toe there, and your careful placement has all gone to pot in a moment.

The e 609 is different in a less-is-more kinda way. Little more than a dynamic mic with a broad flat grille, you just sling it over the front of your guitar cab. When you’ve found the sweet spot, just secure the cable to the top of the cab with a bit of duct tape. No need for stands, booms or black looks.

True to form, like most Sennheiser mics, the e 609 is voiced for detailed clarity, while the supercardioid pattern does an excellent job of rejecting off-axis noise. It’s also built to be tough, hum compensating and vibration free. It’s ideal for toms too, but you’ll need some stands.

• Back to top^

Best microphones for recording: $/£201-400

The ubiquitous NT1 from Rode Microphones is now in its 6th generation and one of the most popular affordable large capsule cardioid condenser microphones out there. The big difference with this latest model is the return to the original design, doing away with USB in favour of a classic XLR-only connection.

The mic uses the same 1” gold-sputtered HF6 capsule as its predecessors, alongside a JFET impedance converter delivering a super-low noise floor of just 4dBA. It really is quiet, and we found it worked fantastically on a Billie Eilish-style breathy vocal. It also performed admirably capturing room ambience for a drum kit, as well as providing an excellent sound capturing the ferocity of a cranked guitar cabinet.

It comes in a range of cool colours which we love, as well as standard black if you prefer your mics to be more subtle. The included pop shield and shock mount are welcome additions too, making it an excellent value, and versatile condenser microphone.

Read our full Rode NT1 Signature review

The AE2300 is a broad-application high-SPL cardioid design, so should be ideal for percussion, drums, guitar amps and brass. It’s also pretty compact (less than 10cm long), so is perfect for discrete use in a live environment.

During testing, we found that the weighty brass casing and top grille felt robust, and the screw-tight rubberised clip should see off any wandering drumsticks while providing some mechanical isolation.

Overall, it’s a beautifully designed and manufactured mic. The proprietary double-dome diaphragm improves high-frequency and transient response. The off-axis frequency response is also reasonably linear up to 120 degrees, and not bad even at 180 degrees off-axis, which could certainly be beneficial when setting up a multi-miked drum kit.

Read our full Audio-Technica AE2300 review

Shure have long been one of the first names pro musicians look to for their microphones. Shure's range doesn't just cover those options for musicians, however - as the MV7 is a great option for those looking to record crisp speech on a budget.

The MV7 is ideal for these applications, with a few neat tricks on hand to make the recording experience as simple and rewarding as possible. We particularly like the complementary MOTIV app, which allows you to choose specific vocal presets to give your sound a professional sheen.

This isn’t going to be the mic musicians or singers will look to. Sure, it can handle these applications at a push, but this is a speech-specific microphone and, at that, the MV7 is a highly capable option indeed.

Read the full Shure MV7 review

The Aston Origin may be competitively priced, but it possesses a degree of originality that is uncommon in this range. The Origin is a fixed pattern (cardioid) condenser and is the smaller of Aston's two mics: the larger Spirit is a multi-pattern condenser with an extra 10dB of pad available. There are two switches on the stainless steel casing: 10dB pad and 80Hz low-cut filter.

We found that the Aston Origin sounds pretty pure and clean. It's not a wholly characterful microphone, but that's one of the things we liked so much during our testing. If you want a solid, safe-sounding reproduction of your sound, then the Origin is one of the best,

The XLR connection is on the underside of the mic, as is a mic stand mounting socket (5/8-inch with a 3/8-inch adaptor included). This latter feature means there's no need for a mic clip, though this does limit angle choices to the capabilities of the stand. The wave-shaped outer spring/mesh acts as a shock absorber for the capsule, and behind it sits a stainless steel wire mesh shielding.

Read our full Aston Microphones Origin review

While some of the mics we feature in this guide serve one specific purpose, there’s always room for a good all-rounder. The AKG C214 is a large diaphragm condenser which will excel at everything from guitar amps to acoustic instruments, pianos and vocals.

We found the C214 to deliver a pretty vast frequency range, and while the higher frequencies of your sound can be accentuated a little more with this microphone, this means that the common issue of muddy, mushy-sounding low end is a thing of the past.

Build quality is exceptional, with an all-metal body and pleasing heft, while there’s in-built attenuation thanks to a switchable 160 Hz bass roll-off. For home studio owners keen to invest in a solid, general-purpose studio microphone, the AKG C214 represents excellent value for money.

Read the full AKG C214 review

Like many large capsule condensers, omni mode on the sE2200a II is unlikely to be this mic's forte, and the MkII's response shows a noticeable dip (6dB) around the 5kHz mark. However, in use this wasn't that obvious, and is possibly compensated slightly by the gentle boost above 7kHz. Either way, both patterns are useful inclusions, and save you the trouble of buying or setting up another mic, should you want to try out different patterns.

Overall, sE's upgrade is a success, and combined with the multi-pattern option, the 2200a MkII is more desirable than ever. OK, the multi-pattern capability has pushed up the price a bit, but there's always the fixed cardioid version if your budget's tight. If you're budget doesn't stretch, check out our guide to the best cheap microphones.

Read our full sE Electronics sE2200a II review

• Back to top^

Best microphones for recording: $/£401-800

If you watch vloggers on YouTube you’ll see this sturdy black mic pop up again and again. For many, it’s the de facto mic for content creation, and for good reason.

Firstly, for close miked applications, it sounds wonderful. Bring your laughing gear right up to this baby and you’re going to sound fantastic – rich and warm, yet with clarity aplenty. Trust us, you’re going to sound just like you, only better.

Second, it makes even untreated rooms sound great. Or, put another way, those awful reflections that haunt poorly treated rooms – you know, like your home studio – won’t intrude on your recordings. Wherever you are, every day with the SM7B is a good day.

Finally, it’s been designed for pro use, which is why it includes some nifty additions such as switchable EQ settings, a built-in pop filter, electromagnetic shielding, a suspension mount and a windscreen. It’s built like a tank too, so will easily shrug off the inevitable knocks, scrapes and probably the occasional drop.

It loves broadcast applications but is commonly found perched in front of vocalists, guitar amps, bass amps, kick drums and horns too.

Read our full Shure SM7B review

The RE20 was originally developed to rival the extended frequency range of a good condenser mic, using a clever take on cruder dynamic technology. In our opinion it fell a little short, physics is physics after all, but Electro-Voice succeeded in producing an altogether more interesting product.

It uses what Electro-Voice calls Variable-D, which is essentially a perforated pipe placed behind the diaphragm that brings some distinct advantages. Most significantly, there is little to no proximity effect. Some mics sound muddy when close miked, while others do manage to successfully combine warmth with clarity. Nevertheless, good or bad, the proximity effect does colour the original sound source, which is not always desirable. The RE20 sounds completely natural, even when used at close quarters.

Another potential issue with the proximity effect is that humans are pretty hopeless at consistently speaking into a microphone from the same distance. As we get distracted we tend to move in, out and generally shake it all about, causing our voice to fluctuate in tone. The RE20 has a consistent frequency response up to 180-degrees off-axis, which means there’s zero colouration to contend with, regardless of how fidgety your talent is.

Finally, although the RE20 can’t match condenser levels of top-end sparkle, it really does have an extended frequency response, which makes it a good choice for vocals and instruments as well as voice applications. It exhibits a tight low-end too, which is perfect for taming guitar cabs, kick drums and low-frequency instruments such as double bass.

As a condenser mic, the C636 is inherently more complex than its dynamic siblings, a complexity that comes at a cost in both R&D and production. Issues with feedback rejection and handling noise have to be balanced against tradeoffs in sound quality.

Behind the simple black exterior and lightness in hand, the C636 boasts serious design chops to give it the ‘Master Reference’ moniker, but is it deserved? In short, yes. The sound is clear and full, far more linear and ‘real’ than its dynamic mic counterparts.

The high frequency range is present and well defined, without the harsh hype and phase-shift peakiness that some (cheaper) condenser mics either display or attempt to mask with an overall HF pull-down.

Read our full AKG C636 review

As one of the best-respected names in recording microphones we were expecting good things from the Neumann TLM 102. This large diaphragm condenser promises superlative performance for vocals, and it does not disappoint.

We found that the TLM 102 offers crystal clear reproduction across the frequency range, with a nice bump around the 6 kHz mark, and is a specialist mic which will do wonders for your mixes.

That’s not to say it can’t do other applications though. It features a relatively high sound pressure threshold, so recording loud sources like drums and guitar amplifiers isn’t out of the question. All told this is an ideal investment for anyone looking to upgrade their recording gear and take their tracks to a new level.

Read the full Neumann TLM 102 review

Electronically, the NTR is active, running from 48V phantom power and has a built-in transformer that offers a high output so that the mic is not so finickity about preamp requirements as other ribbon mics and can, a fact borne out by our tests, be used with a wide range of preamps without having to turn the gain up to noise-generating levels.

Internal shock mounting results in there being no need for an external suspension cradle, which helps with placement and, even though this is quite a heavy mic, the included compact mount which attaches to its base works great at holding it at any angle on a mic stand with little pressure needed to firm it up.

On a variety of sound sources we found the mic to deliver a very natural representation of whatever was put in front of it with plenty of low-end and a clear top with a natural roll off, rather than the often overdone brightness designed into some condensers.

Read our full Rode NTR review

• Back to top^

Best microphones for recording $/£801+

Combining the sound of the past with the forward-thinking utility of the future, the Lewitt Pure Tube condenser mic takes a vintage tone and adds some clever touches to bring it into the realm of the modern musician.

One of the drawbacks of tube microphones is they can be pretty noisy, but that isn’t the case here. Thanks to its dedicated power supply and some clever internal trickery, the Lewitt Pure Tube delivers incredibly quiet performance in terms of noise, even with softly spoken takes or voiceovers. We’d say it works best on vocals, but it can be used on instruments too.

The dedicated power supply connects via a 7-pin XLR to the mic but includes a converter to the traditional 3-pin XLR so you can hook it up to your audio interface. With a shock mount and a carrying case, it’s a very complete offering for the money.

Read the full Lewitt Pure Tube review

This is the lovely large diaphragm condenser mic that picked up a prestigious TEC award at NAMM 2022. It’s been developed to revive the sound of the legendary AKG C12 capsule, the CK12, which was a favourite of everyone from Frank Sinatra to George Martin in the 1950s and ‘60s.

The CK12’s smooth, flat frequency response imparted a silky tone that provided plenty of airy detail in the high end, without the (slight) shrillness of the presence boost that characterised its competitors.

If you’re thinking, ‘hold on, doesn’t Telefunken already make a C12 reissue?’, you’d be right. It does, the imaginatively named C12. There are a few notable differences though.

The TF11 relies on contemporary FET technology rather than the valve driven power of the C12 (old or new). This gives it a slightly different tonal colour, a little cooler but with a faster transient response, higher SPL handling capability, even more detail and less self-noise. It’s a superb mic for vocals, and arguably a better proposition for instruments than the original.

The FET circuitry also brings the price down considerably. The TF11 FET isn’t cheap but it’s an absolute bargain next to the Telefunken C12, which currently retails for about $9,000. The TF11 maybe a tenth of the price, but it’s still hand-made in relatively small quantities to a very high standard. It’s a boutique mic for the masses.

Classic large capsule condenser microphones are without a doubt amongst the most sought-after and expensive items on anyone’s wish list. With an original Neumann U47 commanding up to $10,000, most of these mics are out of reach for the average studio owner, and certainly only possible for a tiny minority of home studios. So in theory, if you can emulate them with software then you should be on to a winner.

There have been a few plugs over the years which have claimed to give one mic the character of another but, given the limitations of the original mic, coupled with any number of mic pres that could have been used, plus the quality of the interface that recorded it, most of them have been pretty disappointing. Slate Digital have taken that idea and built a complete system which removes as many of those variables as possible.

What you get with the VMS is a high-quality, large capsule condenser mic, a dedicated ‘ultra linear’ mic pre and a plug-in which contains the modelled mics. The only variable is that you have to use your own A/D converter to get it into your DAW.

Read our full Slate Digital VMS review

With everything plugged up, the first thing that's obvious with the Aria is just how natural it sounds. There's definitely a slight presence lift, but this is in the upper mids rather than right into sibilant territory. Beyond this there's no high frequency hyping, or the brittleness that plagues mics of that ilk. So, one's attention is drawn to the lows and low mids. These feel solid and although there is a small proximity effect, it's not at all overbearing.

In use we feel the cardioid polar pattern is pretty broad both in horizontal and vertical directions. So the sweet spot is large, which is particularly useful for vocals and acoustic guitars. As a vocal mic the Aria delivers a faithful sound, and when you dig in with more forceful delivery it responds very well. With acoustic guitar it's easy to capture a non-boomy sound, and once again the non-hyped sound is great. The smooth response also lends itself to complex sounds such as guitar amp, strings and percussion.

Read our full Sontronics Aria review

With a new large diaphragm condenser mic there's rarely anything unusual to discuss. After all, the focus is typically on the general frequency response, pick up pattern, build quality and sound. Audio Technica's AT5040 ticks all the boxes of a typical high end phantom powered condenser mic with its discrete component design, low noise, high SPL handling and decent shock mount. Look closer, however, and you will find some special touches. The noise figure is exceptional and the quick release cradle beautifully designed (more later).

Also worth mentioning is the advanced internal capsule decoupling mechanism and the fact that it's 100 percent hand built and inspected. The really big deal here – bigger than that whopping price tag – is the capsule: a four-part rectangular design delivering over ten square cms of surface area (roughly twice that of a one inch capsule). Put into perspective, a circular design with roughly the same area would have a diameter of 3.6cm.

Read our full Audio Technica AT5040 review

Based on the classic AKG C12 mic, the JZ Microphones Vintage V12 is a reissue that isn’t a complete copy. Whilst it's looking to emulate the good qualities of a classic vocal mic, it still has a voice of its own, with many different design decisions too.

It’s not quite as bright as the C12, but it still delivers a clear, crisp tone that sounds incredible on vocals. It sounds beautiful up close with a pop shield attached but you don’t have to use one if you stand back far enough.

The sound is nice and smooth off-axis, so you can mount it sideways if you need to, and the overall low noise floor makes it a great choice on quieter sources. We’re not huge fans of the integrated ball and socket clip however, it’s great for use as a vocal mic but we do feel the lack of flexibility inhibits its use slightly on other sources.

Read our full JZ Microphones Vintage V12 review

• Back to top^

FAQs

How to choose the best studio microphones for you

As with any piece of audio gear, the first question you need to ask yourself is, ‘What sound am I looking for here?' Establishing your sonic objectives early on in the production process will enable you to choose the right kit for the job, including microphones. It's unlikely you'll have a precise notion of how the final recording will shape up, but even a vague idea of the direction you want to take will enable you to make a good start, which is half the battle.

Controls

Many microphones don’t feature any controls whatsoever, but some will have a number of curious little toggle or slider switches. Here’s what they do.

EQ. Possibly the most common (and useful) control will be a bass roll-off switch or high pass filter. This reduces your mic's sensitivity to traffic rumble, HVAC noise and other sources of low end hum. Some mics may also feature a presence boost for bringing out more clarity in vocals.

PAD. Engaging the PAD will attenuate the input signal so that your preamp doesn’t clip or get overdriven. This is a very useful control to have if you’re using a condenser to mic up a loud sound source.

Pattern selector. A few microphones have selectable patterns that you can change on the fly. Flicking this switch will do the trick.

Volume/mix. Some microphones, typically USB, enable you to plug in a set of headphones for monitoring. They often have a volume control, and sometimes a mix control so that you can hear both the sound source and what’s emanating from your laptop/DAW.

How we test

We test recording microphones in a variety of ways and with a lot of different material to test their strengths and weaknesses. Obviously if a mic is designed with a certain instrument in mind then we focus on that type of recording. It may be that a mic has been designed with a specific frequency response for vocals, for example, so we obviously won't use it to record kick drums but, where possible, will try it on similar material if appropriate.

We compare the recordings we make with those made with some of the standard reference microphones we have in our studio, being sure to have them set up in the same way and distance from the source being recorded. We will always try to be fair by comparing like with like – ribbons, condensers, dynamics and those with similar polar patterns – and models of a similar price.

That said, it's often interesting to compare a cheap mic with some vastly more expensive microphones to hear just how close they can get. You'll be surprised at how good some cheaper models are against classic and vintage microphones as, just like every other music gear category, technology has also improved in microphone design.

Some microphones, condensers in particular, are sold as good all-round studio mics, jacks of everything if you like, and if that is the case we will test them on as much material as possible explaining in our tests where they particularly excel or fall down. Finally we look at overall build quality, polar pattern responses, any software bundle options and alternatives within price categories.

Read more abouthow we test music making gear and services at MusicRadar.

• Level up your audio with the best camera microphones
• Work the crowd with the best live vocal microphones
• Finding pod: the best podcast microphones for all budgets
• Plug and play with the best USB microphones
• Our pick of the best iPhone microphones